5 Sting Ray Boat Problems

Tool Kit 11

If you own a Sting Ray Boat, you may already know that they are quite popular for their center console, dual console, and deck boats—known for their quality and durability. But while these boats are considered some of the best on the market, they can also have some problems.

From lack of attention to detail on the manufacturer’s part to hull flexing and nonworking drains, certain issues can crop up when owning a Sting Ray Boat. Additionally, many people find that its limited handling capabilities in choppy waters can be an issue as well. 

Whether you’re considering purchasing a Sting Ray Boat or you’ve been an owner for years, it’s important to understand potential issues that may arise with your boat. It’s not uncommon to face difficulties at some point; however, many owners report that with proper maintenance and upgrades, they’re able to avoid major problems and get the most out of their boats.

Knowing what features could cause trouble ahead of time is key to being prepared for any hiccups you may face during your boating adventures.

Entry Level Boats

When it comes to Sting Ray Boat Problems, many people rely on entry-level boats – but they have their own share of issues. From lack of attention to detail to not having all the bells and whistles that more expensive boats can offer, there can be a lot to consider when looking into purchasing one. 

One of the biggest pitfalls with these entry-level boats is their lack of attention to detail. Although they come with a relatively lower price tag, it often means that many aspects of the boat (interior and exterior) may not be as detailed or finished as higher-end models.

This could mean that many things from upholstery to fiberglass finishes may not look up to par or may need extra work down the line.

Additionally, due to the lower cost of production, these boats may also come with lower-grade materials for certain components such as wiring, pumps, and other mechanical elements which could lead to long-term problems and costly repairs. 

Hull Flexing

One of the biggest drawbacks of owning a Sting Ray Boat is dealing with its flexing hull. Although it may be an advantage for people looking for lighter boats, there are certain problems that come along with owning a boat with a flexing hull.

For instance, when fishing in bigger lakes with choppy waters, the flexing hull can become problematic and cause your boat to rock back and forth more than usual. You might even find that your boat’s performance is severely diminished due to the extra movement caused by the flexing hull.

Another issue related to owning a Sting Ray Boat is that you’ll likely notice a difference between your boat and other boats while riding them. This could lead some people to feel as though they’re missing out on something if they own a Sting Ray Boat due to its light fiberglass layering that gives it its flexing capabilities.

This feeling could be compounded when you’re out in larger bodies of water where other boats seem more stable and maneuverable than yours.

Thankfully, this isn’t necessarily a cause for alarm – flexing hulls won’t have too much of an impact on your experience as long as you take proper precautions when handling the boat so that it doesn’t suffer any damage from rocking or bouncing off waves.

Not Meant for Sea Waters

One of the biggest problems with Sting Ray Boats is their inability to handle big waves. This means that these boats are not suitable for sea fishing, as they cannot handle the rough waves and powerful currents of the ocean.

The components used in Sting Ray Boats are also not designed for seawater, which can lead to corrosion and other damage over time. This makes them less reliable than boats specifically built for use in the sea, which can be a serious issue for fishermen who rely on their boats to make a living.

Another issue with Sting Ray Boats is that they are often not as stable as those built for the ocean. Since they have a shallow draft and lighter weight, they can easily become unstable when faced with choppy waters or strong winds.

This can make them difficult to control and put passengers at risk if they venture too far out into open waters. Additionally, since these boats are not built to accommodate long journeys, they may break down more frequently than those made exclusively for ocean use. 

Questionable Workmanship

If you own a Sting Ray Boat, then you might have encountered issues with its workmanship. From nonworking drains to faulty electrical lines and wiring, these issues can cause a lot of inconveniences and potentially pose serious safety risks.

Even the windshield may come off due to poor construction or faulty installation. All of this points to subpar craftsmanship, which could lead to major problems down the line if left unchecked. 

When looking into questionable workmanship in a Sting Ray Boat, it’s important to look out for signs of wear and tear that may indicate a larger issue is present. Non-functioning drains are one such sign – if the boat’s drainage system isn’t functioning properly, then there could be deeper underlying issues that need to be addressed soon.

Similarly, if the windshield appears loose or about to fall off, then this is also an indication of shoddy workmanship or improper installation practices. Electrical lines and wiring should also be thoroughly checked for any potential damage that could lead to hazard-causing risks such as fires or shocks.

Gelcoat Problems

If you own a Sting Ray boat, you may have noticed that the Gelcoat can become pale and even start to peel off after only a few years of use.

This isn’t because of any defect in the brand of the boat; it’s an issue that almost all fiberglass boats suffer from at some point. The problem is that environmental factors, such as intense UV light, can penetrate through the Gelcoat and cause blisters on the hull.

To protect against this, waxing your boat periodically can help maintain its original color and keep blisters from forming. Doing so will also extend the longevity of your boat and make sure it looks good for years to come.

In addition to waxing, there are other steps you can take to keep your Sting Ray boat looking great and prevent any serious damage from occurring.

It’s important to keep an eye out for any small cracks or chips in the Gelcoat so they don’t spread further – these can be filled with a special marine-grade filler material and then polished back up to look like new again.

It’s also worth investing in a quality fiberglass cleaner since this will help get rid of dirt and grime that accumulates over time, keeping your boat looking spotless. Following these simple steps will ensure that your Sting Ray boat looks like it just came out of the factory for many years down the line!


In conclusion, Sting Ray boats have their advantages and disadvantages when compared to other types of watercraft. While they may be lighter and smaller in size, they are not built for use in the sea and can easily become unstable if conditions get choppy or windy. Additionally, many people find that these boats come with a lot of issues regarding their workmanship and Gelcoat, which can lead to costly repairs if not taken care of properly. That being said, proper maintenance is key to keeping your Sting Ray boat in top condition and ensuring that it lasts for many years.