Striker Plus 4 is an excellent fish finder manufactured by Garmin. This high-quality device is used by anglers all around the world to find fish in both fresh and salt water. The Striker Plus 4 has a bright, color display and uses GPS to show your location on the water. It also includes a built-in flasher for finding fish in deep water.
Like most electronic gadgets, the Striker Plus 4 is not perfect and may experience occasional issues. In this article, we will take a look at some of the most common problems with the Striker Plus 4 and how to troubleshoot them.
Striker Plus 4 Won’t Turn On
If your Striker Plus 4 won’t turn on, the first thing you should do is check the battery. If the battery is dead, it will need to be replaced or recharged. You can check the charge level of the battery by pressing and holding the Power button for 3 seconds. The battery icon on the display will show the charge level.
Nonworking batteries are the most common reason why the Striker Plus 4 won’t turn on, but there are a few other things that could be causing the problem. Simply try charging other gadgets with the same battery to check if it is working or not.
You should also check the fuse on the back of the Striker Plus 4. If the fuse is blown, it will need to be replaced. A blown fuse is quite often the reason why the Striker Plus 4 won’t turn on.
The fuse can be found in the power cable. To check if the fuse is blown, remove it from the power cable and hold it up to a light. If you cannot see light shining through the fuse, it is most likely blown and will need to be replaced.
If the fuse is not blown, the next thing you should check is for pinched wires. To do this, remove the cover of the Striker Plus 4 and check the wiring around the power connector. If any of the wires are pinched, gently straighten them out. Once you have checked the wiring, replace the cover and try turning on the Striker Plus 4 again.
If the Striker Plus 4 still won’t turn on, it is most likely a problem with the power supply. Check to make sure that the power cable is securely plugged into both the Striker Plus 4 and the mains socket. If it is, try plugging the power cable into a different socket. You could also try using a different power cable altogether.
Check if the battery output is on by testing the voltage with a multimeter. If there is no power output, then the problem is most likely with the battery or charger. If the voltage supplied by the battery is less than 12 volts, the battery will need to be replaced.
If you have tried all of these troubleshooting steps and the Striker Plus 4 still won’t turn on, then it is most likely a hardware issue and you will need to contact Garmin for assistance.
No GPS Signal in Striker Plus 4
Garmin Striker 4 Plus is enabled with GPS, which is used to show your location on the display. If there is no GPS signal, the Striker Plus 4 will not be able to show your location. There are a few things that could be causing this problem.
If your gadget is sitting idly for many months, the GPS signal will be lost. The satellite signals can only be maintained if you keep using your gadget regularly.
The GPS signal can also be lost if you are in an area with a lot of trees or tall buildings. These obstructions can block the satellite signals from reaching your Striker Plus 4.
Weather conditions can also affect the GPS signal. If it is raining or snowing, the satellite signals will be weaker and you may lose the GPS signal. If you are having trouble getting a GPS signal, try moving to a different location. If the problem persists, contact Garmin support for assistance.
Updating the software to the latest stable build may also help to fix the problem. You can update the software by connecting your Striker Plus 4 to a computer and downloading the updates from the Garmin website.
No Sonar in Striker Plus 4
If there is no sonar signal in your Striker Plus 4, it could be due to a few different reasons.
First, check if the transducer is installed properly. The transducer is the part of the fish finder that emits and receives the sonar signals. If it is not installed correctly, it will not be able to send or receive the sonar signals properly.
Second, check if the transducer is plugged into the Striker Plus 4 correctly. The transducer must be plugged into the correct port in order for it to work properly. Make sure the sonar cable is sitting firmly in the port and that there are no loose connections.
Many people quite often select the wrong transducer type in their Striker Plus 4 settings. The transducer type must be selected correctly in order for the Striker Plus 4 to work properly. To check if you have selected the right transducer type, go to Menu > Settings > Sonar > Transducer Type.
If you are still having trouble with your sonar, try updating the software on your Striker Plus 4. You can update the software by connecting your Striker Plus 4 to a computer and downloading the updates from the Garmin website.
A nonworking transducer can also be the reason why there is no sonar signal. If you have tried all of these troubleshooting steps and the problem persists, the transducer may be defective and will need to be replaced. Contact Garmin support for assistance.
Troubleshooting the Power Button
There have been some reports of people having trouble with the power button on their Striker Plus 4. If you are having trouble with the power button, here are a few things you can try.
First, try holding down the power button for 20-30 seconds. This will sometimes reset the Striker Plus 4 and fix the problem.
If that doesn’t work, try removing the battery and then reinserting it. This will also sometimes reset the Striker Plus 4 and fix the problem.
Not Creating Waypoints With Incorrect Location
This problem mainly arises because of map datum which is different for different regions of the world. The Map Datum setting in your Striker Plus 4 needs to be set correctly in order for the waypoints to be created in the correct location. To check or change the Map Datum setting, go to Settings > Units
By selecting the correct Map Datum for your region, the problem should be fixed and the waypoints will be created in the correct location.
Garmin has an excellent customer support team that can help you with any problems you may be having with your Striker Plus 4. If you have tried all of the troubleshooting steps and you are still having trouble, then you can contact Garmin support for assistance.
Display Not Responding
If the display on your Striker Plus 4 is not responding, it could be due to a few different reasons.
First, check if the battery is properly inserted and charged. If the battery is low on power, it will not be able to power the display properly and you may see some strange behavior.
Check the LCD Brightness setting in your Striker Plus 4. The LCD Brightness setting controls how bright the display is. If the setting is too low, the display may be difficult to see.
Conclusion
The Garmin Striker Plus 4 is a fish finder that has been known to have some common problems. In this article, we have provided you with troubleshooting steps to try if you are experiencing these problems. If you have tried all of the steps and are still having trouble, Garmin has an excellent customer support team that can help you resolve the issue. Lack of battery power is the primary cause of most of these problems, so be sure to check the battery level before troubleshooting any further.
Clifford Slater is a seasoned writer with over 25 years of experience in boats and fishing trips. With his extensive knowledge and expertise in boats and fishing, he has become a recognized authority in the industry. Clifford has made it a point to regularly visit popular fishing destinations such as Florida and other places in the USA to stay up to date with the latest trends and techniques in the field.
Over the years, Clifford has acquired a wealth of knowledge about boats and fishing, which he has shared through his writing. His articles and books are widely read by fishing enthusiasts and professionals alike, and his insights are highly valued by those seeking to improve their skills in the field. Clifford’s passion for boats and fishing is evident in his writing, and his readers appreciate the depth of his expertise and his ability to communicate complex topics in an engaging and accessible way.
Clifford Slater’s impressive credentials and dedication to his craft make him a trusted authority in the world of boats and fishing. His commitment to staying up to date with the latest developments in the industry, combined with his deep knowledge and understanding of the subject matter, ensures that his writing is always informative and valuable. For those seeking to improve their skills or simply enjoy the beauty of the sea, Clifford’s writing is a must-read.
